Ladders

Ladders

Berry Material Handling represents several manufacturers that can supply you with rolling metal ladders, cross-overs, step-stools and alternating tread ladders, whichever product that suits your companies’ needs.

Let’s Get Started

"*" indicates required fields

Cotterman Rolling Ladders

Cotterman has been making quality american made ladders since 1925. Whether you need a fixed steel ladder, rolling warehouse ladder, office ladder, or a Tilt-N-Roll ladder, a product exists to solve your immediate needs.

1000

Series 1000

Our flagship product line. The value added features of the Series 1000 make it our best seller. Ships set-up from one of our four locations, reducing freight costs and damage. Plus, when it arrives, it goes directly in to use.

450 LB. Load Rating
All tube members are 1″ steel tube construction.
Steps are 7″ deep in your choice of tread.
Top steps are 10″, 20″ or 30″ deep.
Spring-loaded 2″ casters are used on 1 to 4 step ladders. The Cotterman® SafeLock™ is used on 5 step ladders and above.
Gray powder coat is the standard finish.
Series 1000 ladders meet applicable OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

1200

Series 1200

EASY 50° CLIMBING ANGLE LADDERS

The same quality construction as our SERIES 1000, but with a more gradual 50° climbing angle, allowing for forward descent. SERIES 1200 ships ready-to-use up to 8 steps.

450 LB. LOAD RATING.

50° climb angle.
All tube members are 1″ steel tube construction.
Steps are 7″ deep in your choice of tread.
Top steps are 12″ or 24″ deep.
Spring-loaded 2″ casters are used on 3 & 4 step ladders. The Cotterman® SafeLock is used on 5 step ladders and above.
Gray powder coat is the standard finish.
Series 1200 ladders meet applicable OSHA and ANSI standards
CAL-OSHA models also available.

Learn More

1500

Series 1500

The SERIES 1500 is the “assembly required” version of our 1000 series. Packaged and partially assembled, the ladders require approximately 15-30 minutes to assemble, depending on size. This series has the most selection of all our products, ranging from three to sixteen steps.

450 LB. LOAD RATING.

All tube members are 1″ steel tube construction.
Steps are 7″ deep in your choice of tread.
Top steps are 10″, 20″ or 30″ deep.
Spring-loaded 2″ casters are used on 3 to 4 step ladders. The Cotterman® SafeLock is used on 5 step ladders and above.
Gray powder coat is the standard finish.
Series 1500 ladders meet applicable OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

6500

Series 6500

The SERIES 6500 Roll-N-Fold Ladder is a portable steel rolling ladder than can be folded for transporting or storage. The rear of the ladder has large 10″ rubber wheels for easy portability, even on rough surfaces. Rubber pads on the front legs hold the ladder secure during use. 5 to 9 step ladders are moved by tilting and rolling it like a wheelbarrow. The SafeLock is standard on 10-16 step models, but also available as an addition option on the 5-9 step models.

450 LB. LOAD RATING.

59° climbing angle.
Rigid 1″ O.D. tubular frame is designed to be folded. (folding requires removal of 2 – 4 bolts)
Treads are 7″ deep and 16″ wide. The standard top step is 10″ deep and 16″ wide, deep tops are 20″ deep by 16″ wide.
Large 10″ diameter solid rubber wheels.
Ships partially-assembled.
Series 6500 ladders meet applicable OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

Series "A"

Series “A”

WELDED ALUMINUM LADDERS

SERIES “A” ladders ship set-up and ready-to-use.

In addition to being lightweight, aluminum ladders are corrosion resistant and unpainted. They are also non-magnetic.

350 LB. LOAD RATING.

Both the steps and the top step are 16″ or 24″ wide. The steps are 7″ deep. The top step is 14″ deep.
All ladders are provided with 2″ spring-loaded casters.
Unpainted, aluminum finish.
Series “A” aluminum ladders meet applicable OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

Wheelbarrow

Wheelbarrow Ladder

EASY-ROLLING WELDED ALUMINUM SAFETY LADDERS

Lightweight lift-and-roll design with 10″ rubber wheels for easy portability, even on rough surfaces.
In addition to being lightweight, aluminum wheelbarrow ladders are corrosion resistant and unpainted.
They are also non-magnetic.

350 LB. LOAD RATING.

Both the steps and the top step are 16″ or 24″ wide. The steps are 7″ deep. Top step is 14″ deep.
10″ diameter rear wheels.
Unpainted, aluminum finish.
Aluminum Wheelbarrow ladders meet applicable OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

TiltNRoll®

The TiltNRoll^® features a special balanced design that allows it to tilt easily to the rolling position when pulled toward the user. The user is not required to extend a foot to assist in tilting the ladder to the rolling position. Once tilted, the ladder can be easily moved from job to job on the two 4″ diameter wheels. TiltNRoll^® ladders are one-piece welded assemblies shipped ready-to-use. The ladders are supplied with handrails that extend 30″ above the top step. TiltNRoll^® ladders come standard in Steel, but are available in Stainless Steel and Aluminum.

450 LB. LOAD RATING.

59° climb angle.
Rests on four 2-1/2″ rubber pads.
7″ deep steps with 10: deep top step (standard) 20″ deep top step available.
Gray powder coat is the standard finish.
Arrives ready-to-use.
Also available in Aluminum (350 lb. capacity).
Also available in Stainless Steel.
TiltNRoll® ladders meet applicable OSHA and ANSI standards.
Cal-OSHA models also available.

Get Started

1700

Series 1700

EASY 50° CLIMBING ANGLE LADDERS (PARTIALLY ASSEMBLED)

The “some assembly required” version of the 1200 series ladders. Built with the same quality construction, the SERIES 1700 offers a more gradual 50° climbing, allowing for forward descent.

450 LB. LOAD RATING.

50° climb angle.
All tube members are 1″ steel tube construction.
Steps are 7″ deep in your choice of tread.
Top steps are 12″ or 24″ deep.
Spring-loaded 2″ casters are used on 3 & 4 step ladders. The Cotterman® SafeLock is used on 5 step ladders and above.
Gray powder coat is the standard finish.
Series 1200 ladders meet applicable OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

2600

Series 2600

HEAVY DUTY LADDERS

SERIES 2600 is a superior line of partially assembled steel safety ladders. Designed and constructed for extra heavy duty use, these ladders have extra bracing and heavier materials to resist damage. They are available in 6-15 step sizes.

800 LB. LOAD RATING.

50° climb angle.
Larger 1-1/4″ diameter tube base and back construction.
2-1/2″ rubber pads on front legs.
7″ deep steps, 12″ or 24″ deep top step.
Ladders are equipped with the Cotterman® SafeLock caster system.
Gray powder coat is the standard finish.
Series 2600 ladders meet OSHA and ANSI standards.
CAL-OSHA models also available.

Learn More

Need Installation & Maintenance Services?

Berry Material Handling offers installation for all major material handling products as well as custom fabrication for your special projects. We can also tailor preventative maintenance and service programs to identify problems before they arise, helping to reduce costly breakdowns and downtime. We customize the maintenance to fit your needs and provide services including equipment review, lubrication, tightening and adjustments.