Bendi B55AC

Bendi B55AC

Bendi B55AC Information

Bendi Rear Wheel Drive High Capacity, High Lift Narrow Aisle Multipurpose Electric Articulating Forklift

The Bendi model B55AC works in aisles as narrow as *84″ (2.13M). The B55AC high volume model has a basic capacity of 5,500 lbs. (2495kg) at 24″ (600mm) load center and has lift heights available to 30′ (9.14M). The B55AC model is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. Excellent traction, braking and power enable climbing steep ramps with loads. Three or four stage masts are available. The B55AC can work inside and outside on paved surfaces and have a floating front axle, allowing the truck to ride smoothly over uneven floors and do the jobs of reach and counterbalanced trucks but with much heavier loads and in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B55AC provides exceptional control and makes load placement and retrieval superior to the competition.Maximizes Material Handling ProductivityThe versatile Bendi B55AC forklift replaces conventional reach and counterbalanced fork trucks in standard warehouse operations. The unique design allows operators to use it as a counterbalance truck indoors or out, while operating in narrow aisles in your warehouse, replacing reach trucks that require much wider aisles. The Bendi B55AC has large diameter tires and the truck has great underclearance for avoiding floor obstructions. One truck can go from inside the dock to the rack, eliminating staging and additional operators and support forklifts. *Based on 48” (1200mm) long x 40” (1000mm) wide load.

List of Specifications

HEIGHT89 / 226 in/mm overhead guard
WHEELBASE69 / 175 in/mm
WIDTH46 / 117 in/mm overhead guard, 56 / 142 in/mm
WEIGHT16950 / 7705 lbs/kg with battery
GROUND CLEARANCE3 / 7.6 in/mm
ENGINE TYPE48-volt-battery
TIRES14x8 / 36x20, 18x9 / 46x23
CAPACITY5500 / 2495 lbs/kg
MAST3/3 degrees N/A
RIGHT ANGLE STACK84 / 213 in/cm
LIFT SPEED90 / 27.4 fpm/mpm
FORKSLength: 40 / 101 in/cm
TRAVEL SPEED6.5 / 10.5 mph/kph

List of Features

  • B55AC 5500 lb 2495kg Capacity at 24 600mm Load Center
  • 48 Volt Electrical System
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth Reliable Long Lasting Steering Control
  • Ergonomic Design for Exceptional Operator Comfort and Safety
  • Four Wheel Design Dual Rear Wheel Drive Provides Excellent Power Braking and Traction
  • High Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • High Visibility Mast Allows Optimum Safety and Control
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Integral Wide Stroke Sideshifter Makes Placing and Picking Loads Effortless
  • Interactive LCD Status Monitor BDI with Lift Interrupt Hour Meter with Service Monitor Diagnostic Code Display Input Device Calibration
  • Optional Cold Storage Conditioned to 22 F 30 C
  • Standard Features
* Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
REQUEST A QUOTE
Manufacturer Bendi
Category Fork Lifts and Lift Trucks
Subcategory Very Narrow Aisle
Model B55AC
Condition Showroom
Year 2019
Hours 0
Financing calculator
Machine price ($)
Interest rate (%)
Period (month)
Down Payment ($)
Calculate
Monthly Payment
Total Interest Payment
Total Amount to Pay