Bendi B40AC-HL/B50AC-HL

Bendi B40AC-HL/B50AC-HL

Bendi B40AC-HL/B50AC-HL Information

Bendi Rear Wheel Drive – Narrow Aisle Multipurpose High Lift Articulating Electric Forklift Maximizes Material Handling Productivity. The Bendi model B40AC-HL/B50AC-HL works in aisles as narrow as 78″* (1.98M), has a basic starting capacity of 4,400 lbs. (1996 kg) at 24″ (600mm) load center and has lift heights available to 41′ (12.50M).

The Bendi B40AC-HL/B50AC-HL is a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The B40AC-HL / B50AC-HL can work inside and outside on paved surfaces and has a floating front axle allowing the truck to ride smoothly over uneven floors. The B40AC-HL/B50AC-HL does all of the jobs of a reach and counterbalanced truck but in much narrower aisles.

Exceptional Performance and Maneuverability

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-HL/B50AC-HL provides exceptional control and makes load placement and retrieval superior to the competition.3-Stage MastThe new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 42” (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance. Mountings for cameras have been integrated into the inner mast and an optional integral side shifting fork positioner combination is also available. *Based on 48” (1200mm) long x 40” (1000mm) wide load.

List of Specifications

HEIGHT89 / 2,261 in/mm overhead guard
WHEELBASE73.4 / 1,864 in/mm
WIDTH89 / 2,261 in/mm overhead guard
WEIGHT14,270 / 6,486 lbs/kg with battery
TIRES14x5 / 356x127, 18x7 / 457x178
CAPACITY4,400 / 2,000 lbs/kg
MAST0 / 3 degrees
LIFT SPEED90 / 27.4 fpm/mpm
FORKSLength: 40 / 1,016 in/cm
TRAVEL SPEED6.5 / 10.5 mph/kph

List of Features

  • Interactive LCD Status Monitor BDI with Lift Interrupt Hour Meter with Service Monitor Diagnostic Code Display Input Device Calibration
  • Integral 11.2 285mm Stroke Sideshifter and 36 914mm High Load Backrest
  • Adjustable Seat and Steering Wheel
  • 4400 lb 1996kg and 5000 lb 2268kg Capacity at 24 600mm Load Center
  • 48 Volt Electrical System
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth Reliable Long Lasting Steering Control
  • Four Wheel Design Dual Rear Wheel Drive
  • High Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • High Visibility Mast Allows Optimum Safety and Control
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • Optional Cold Storage Conditioned to 22 F 30 C
  • Standard Features
* Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
Contact A Sales Professional
Manufacturer Bendi
Category Forklifts and Lift Trucks
Subcategory Very Narrow Aisle
Model B40AC-HL/B50AC-HL
Condition Showroom
Year 2021
Hours 0
Financing calculator
Vehicle price ($)
Interest rate (%)
Period (month)
Down Payment ($)
Monthly Payment
Total Interest Payment
Total Amount to Pay

We care about your privacy.

We use cookies to make your experience of our websites better. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on more information.